|
Limited Lifetime
Warranty!
  
   
Click
to enlarge
The Original BilletFlow Snub
Idler Pulley and Bracket for the 2003-2004 Ford SVT Cobra.
Why
pay more for less?
Our Snub Idler
Kits will give you extreme Belt Wrap and will help to Eliminate
any or ALL Supercharger Belt Slippage, Our setup will work
on supercharger pulleys ranging form Stock (3.100") to 2.76".
Single piece, rigid
construction providing Maximum dependability for High Horsepower
Applications.
No extra parts to fail !!
Our pulleys are made from
6061-T6 Billet Aluminum and CNC machined to Perfection! We
use High Speed Bearing for long service life and quiet operation.
We use five retention screws to not only keep the Bearing seated
in the pocket but also keep the bearings outer race from spinning
in the bore from thermal expansion and wallowing out causing
pulley failure.
The Single Pulley Idler Kits comes with:
1~ Bracket
1~ 100mm Billet Pulley
Your choice of color (Red Fire, Sonic Blue, Black, Clear)
All required bolts for installation are provided ( Grade 8 )
(we do not offer a belt at this time)
The 4 Pulley Idler Kits comes with:
1~ Bracket
1~ 92mm Billet Pulley
(Look at above pic
to see where they go)
3~ 100mm Billet
Pulleys
Your choice of color (Red Fire,
Sonic Blue, Black, Clear)
All required bolts for
installation are provided ( Grade 8 )
(we do
not offer a belt at this time)
We recommend Goodyear
"Gatorback" and Gates "Green Stripe" belts.
-
-
Idler
Bracket:
-
Material:
6061-T6 Billet Aluminum
-
Process:
CNC Machined
-
Coating:
Anodized Black
-
-
Idler
Pulley:
-
Billet
Aluminum Pulleys Anodized Silver, RedFire, SonicBlue or Hard
Black
-
High Speed, Contact Seal Ball
Bearings (better then OEM)
Note:
Hard Anodized pulley's are available in Black only
MSRP:
Single Pulley Kit (1 Hard Anodized Pulley and Bracket)
$149.00
4 Pulley Kit (4 Hard anodized Pulleys and Bracket)
$325.00
Individual Hard anodized
Billet Pulleys
$
72.00
Snub Idler Bracket and
Hardware
$ 94.00
New Snub Idler Bracket.........................Old Snub
Idler Bracket
NOTE: The old bracket requires 1/2" smaller belt
length
(Subtract 1/2" to all belt lengths below)
Belt Selection Guide
Note:
We only carry a few belt sizes
(a good place to
order belt online is www.rockauto.com
)
No Idlers
Pulley
Size.....Belt Size.......Gates Part No......Gatorback Part
No.
3.65 (stock).....75.1"
.............K080751................4080750
3.40................75".................K080750................4080750
3.10................74.5...............K080745................4080745
With Single Snub
Idler and Bracket Kit
Pulley Size.....Belt
Size.......Gates Part No......Gatorback Part
No.
3.65...............75.5"...............K080755................4080755
(can not use New
Bracket)
3.40...............75.1"...............K080751................4080750
(can not use New
Bracket)
3.10...............74.5"...............K080745................4080745
(must use 92mm Idler
Pulley)
2.93...............74.5"..................K080745................4080745
(with 100mm
Idler)
2.76...............74.5"..................K080745................4080745
(with 100mm Idler)
With 4 Pulley snub Idler Kit
(3-100mm and 1-92mm)
Pulley Size....Belt
Size........Gates Part No......Gatorback Part
No.
3.65..............77"...................K080772...............4080772
(can not use New
Bracket)
3.40..............76.5"................K080765...............4080765
(can not use New
Bracket)
3.10..............75.5"................K080755...............4080755
(must use 92mm Idler
Pulley)
2.93..............75.5"................K080755...............4080755
(with 100mm
Idler)
2.76..............75.1".................K080751...............4080750
(with 100mm Idler) (Stock Belt)
With 4 Pulley snub
Idler Kit (3-100mm and 1-92mm) and 2lb Metco Lower kit
Pulley
Size....Belt Size........Gates Part No......Gatorback Part
No.
3.65..............XX.X"................K080XXX...............4080XXX
(can not use New
Bracket)
3.40..............XX.X"................K080XXX...............4080XXX
(can not use New
Bracket)
3.10..............XX.X"................K080XXX...............4080XXX
(must use 92mm Idler
Pulley)
2.93..............78.0"................K080780...............4080780
(with 100mm
Idler)
2.76..............XX.X"................K080XXX...............4080XXX
(with 100mm Idler) (Stock Belt)
With 4 Pulley snub
Idler Kit (3-100mm and 1-92mm) and 4lb Metco Lower kit
Pulley
Size....Belt Size........Gates Part No......Gatorback Part
No.
3.65..............XX.X"................K080XXX...............4080XXX
(can not use New
Bracket)
3.40..............XX.X"................K080XXX...............4080XXX
(can not use New
Bracket)
3.10..............XX.X"................K080XXX...............4080XXX
(must use 92mm Idler
Pulley)
2.93..............XX.X"................K080XXX...............4080XXX
(with 100mm
Idler)
2.76..............XX.X"................K080XXX...............4080XXX
(with 100mm Idler) (Stock Belt)
With 4 Pulley snub
Idler Kit (3-100mm and 1-92mm) and 6lb Metco Lower kit
Pulley
Size....Belt Size........Gates Part No......Gatorback Part
No.
3.65..............XX.X"................K080XXX...............4080XXX
(can not use New
Bracket)
3.40..............XX.X"................K080XXX...............4080XXX
(can not use New
Bracket)
3.10..............XX.X"................K080XXX...............4080XXX
(must use 92mm Idler
Pulley)
2.93..............XX.X"................K080XXX...............4080XXX
(with 100mm
Idler)
2.76..............XX.X"................K080XXX...............4080XXX
(with 100mm Idler) (Stock Belt)
With 4 Pulley snub
Idler Kit (3-100mm and 1-92mm) and 8lb Metco Lower kit
Pulley
Size....Belt Size........Gates Part No......Gatorback Part
No.
3.65..............XX.X"................K080XXX...............4080XXX
(can not use New
Bracket)
3.40..............XX.X"................K080XXX...............4080XXX
(can not use New
Bracket)
3.10..............XX.X"................K080XXX...............4080XXX
(must use 92mm Idler
Pulley)
2.93..............XX.X"................K080XXX...............4080XXX
(with 100mm
Idler)
2.76..............XX.X"................K080XXX...............4080XXX
(with 100mm Idler) (Stock Belt)
BTW: Never try to use the pulley puller to remove an
interchangeable aluminum pulley ring. Always remove the ring
first, then remove the steel hub with the pulley puller with the
hub removal plated in place.
|
<~~Click
only!, Cashiers Check, Money Order, USPS Money Order 